Parent Elements

bodyPr (§5.1.5.1.1); effectStyle (§5.1.4.1.11); spPr (§5.6.2.29); spPr (§5.7.2.198); spPr (§5.8.2.23); spPr (§5.1.2.1.35); spPr (§4.4.1.41); spPr (§5.9.3.7); spPr (§5.2.2.6); txPr (§5.9.5.12)

Child Elements

Subclause

bevelB (Bottom Bevel)

§5.1.7.3

bevelT (Top Bevel)

§5.1.7.4

contourClr (Contour Color)

§5.1.7.6

extLst (Extension List)

§5.1.2.1.15

extrusionClr (Extrusion Color)

§5.1.7.7

Attributes

Description

contourW (Contour Width)

Defines the width of the contour on the shape.

[Example: Consider the following example of a contourW in use within the sp3d element:

<a:sp3d extrusionH="165100" contourW="50800"
prstMaterial="plastic">
<a:bevelT w="254000" h="254000"/>
<a:bevelB w="254000" h="254000"/>
<a:extrusionClr>
<a:srgbClr val="FF0000"/>
</a:extrusionClr>
<a:contourClr>
<a:schemeClr val="accent3"/>
</a:contourClr>
>/a:sp3d>

In this example, we see a countourW defined as 50800. end example]

The possible values for this attribute are defined by the ST_PositiveCoordinate simple type (§5.1.12.42).

extrusionH (Extrusion Height)

Defines the height of the extrusion applied to the shape.

[Example: Consider the following example of an extrusionH in use within the sp3d element:

<a:sp3d extrusionH="165100" contourW="50800" prstMaterial="plastic">
< <a:bevelT w="254000" h="254000"/>
<a:bevelB w="254000" h="254000"/>
<a:extrusionClr>
<a:srgbClr val="FF0000"/>
</a:extrusionClr>
<a:contourClr>
<a:schemeClr val="accent3"/>
</a:contourClr>
</a:sp3d>

In this example, we see a extrusionH defined as 165100. end example]

The possible values for this attribute are defined by the ST_PositiveCoordinate simple type (§5.1.12.42).

prstMaterial (Preset Material Type)

Defines the preset material which is combined with the lighting properties to give the final look and feel of a shape.

[Example: Consider the following example of a prstMaterial in use within the sp3d element:

<a:sp3d extrusionH="165100" contourW="50800"
prstMaterial="plastic">
<a:bevelT w="254000" h="254000"/>
<a:bevelB w="254000" h="254000"/>
<a:extrusionClr>
<a:srgbClr val="FF0000"/>
</a:extrusionClr>
<a:contourClr>
<a:schemeClr val="accent3"/>
</a:contourClr>
</a:sp3d>

In this example, we see a prstMaterial defined as plastic. end example]

The possible values for this attribute are defined by the ST_PresetMaterialType simple type (§5.1.12.50).

z (Shape Depth)

Defines the z coordinate for the 3D shape.

The possible values for this attribute are defined by the ST_Coordinate simple type (§5.1.12.16).